02-23-2010 02:05 PM
Hi
I got a RVL200 with 4 vlans.
I need dhcp server from the router on 3 af the vlans. But the last one last one i have a Microsoft SBS server, so i don't what the router too give out ip adresses on that vlan. But it look likes when the DHCP server i is on, its give out ip adresses on all vlan's.
02-24-2010 12:19 PM
Hello and good afternoon,
Are you running the latest code?
Here is the config guide, please turn to page 20 for the config steps:
http://www.cisco.com/en/US/docs/routers/csbr/rvl200/administration/guide/RVL200_V10_UG_C_WEB.pdf
HTH,
Andrew Lissitz
02-25-2010 12:53 AM
Hi Andrew!
Thanks for your response If you look at the picture at page 20 “DHCP > Multiple VLANs” you can’t disable DHCP on only one of the vlans.
I have a full subnet on every vlan.
My Small Business Server 2008 has its own DHCP server, so if I put it on a vlan with a DHCP server it will conflict. But I have guest net on one of the vlan, where I want the dhcp server from the RVL200. Best regards Martin
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: