Different public WAN IPs on single router interface
Hi,I have two Public wan Ips one is 220.127.116.11/30 and other with 18.104.22.168/29,now i have nattted 22.214.171.124/29 for LAn segment,I want to use the other block 126.96.36.199/29 for video conferencing service without natting/patting ,the limitations is that i have one ISP media connected to my cisco 2911 router ,how can I manage both IPs(especially the 188.8.131.52/29 with their different gateways over a single Wan link(from ISP to the Router),without nating for video conference server.(video conference server needs to be assigned public ip from block 184.108.40.206/29)
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...