I have a DynDNS client on a RV042 router that does not update. Using a DynDNS Pro account. RV042 is at release 1.3.13.02-tm.
The RV042 shows successfully connected however after removing a previous PC running the DynDNS updater, DDNS did not update when the WAN IP changed? I've seen other forum posts that elude to users having issues with the feature on the RV-series. Any tips or is it best to stay with the pc-based updater and disable the client on the RV router?
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...