I have had a RV220W for about 3 months and recently looked at the logs and noticed I am getting errors(over 150 errors and warnings). One of the errors that I get is: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Yesterday I updated to the latest firmware and noticed I still have the same problem. What can I do to fix this or is it another flaw in the firmware?
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...