Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Firmware update failing -- WRVS4400N

Linksys WRVS4400N

Current Firmware Version: V1.00.16

Tried updating the firmware to either of the two version you seem to have available, but fails with:

"Upgrade file is not the correct type or version for this device.  Upgrade failed.  Please obtain the correct file and try again."

Tried this one: WRVS4400Nv2_v2.0.2.1.img

And this one: WRVS4400Nv2-fw-2.0.1.3-K9.img

Then spent 2 hours trying to find how to get support for this product.

Could someone indicate where I may download the correct firmware for this product, please?  Thanks.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Firmware update failing -- WRVS4400N

if you have the 1.0 or 1.1 model of the WRVS4400n then you'll have to download from here

http://www.cisco.com/cisco/software/release.html?mdfid=282446893&flowid=791&softwareid=282487380&release=1.1.13&relind=AVAILABLE&rellifecycle=&reltype=latest

where it says that the highest firmware version for your model is 1.1.13.

regards

Dominik

2 REPLIES
New Member

Firmware update failing -- WRVS4400N

if you have the 1.0 or 1.1 model of the WRVS4400n then you'll have to download from here

http://www.cisco.com/cisco/software/release.html?mdfid=282446893&flowid=791&softwareid=282487380&release=1.1.13&relind=AVAILABLE&rellifecycle=&reltype=latest

where it says that the highest firmware version for your model is 1.1.13.

regards

Dominik

New Member

Firmware update failing -- WRVS4400N

That worked.  Thank you.

4479
Views
0
Helpful
2
Replies
CreatePlease to create content