Switching from RV082 router to SA520 K9 router. In the RV082 router under the setup tab, and then forwarding. I have a udp and tcp service running on port 7195, to our server address 192.168.xx.x. I can not find where I would be able to do the same thing on the SA 520 K9. This is so when people go to our webpage and click on a link it brings up a webpage that connects to our database. The only thing I found was where can setup a service, but it does not point to our server address, which makes it where it does not work.
Thank you for any help that gets our web access for our patrons running again.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...