Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How To Direct A Specific External Static ISP IP To A Specific Internal Computer With A Private IP Address?

How can I configure my RV220W router to direct a static IP address to a specific computer on the network.

Comcast Business with 5 static IPs.

NOTE:  I have confirmed the static IPs are available to the RV220W

Static IP #1 (70.xx.xxx.101) ---> Computer #1 (192.168.2.xxx)

Static IP #2 (70.xx.xxx.100) ---> Computer #2 (172.30.9.xxx)

 

Thanks,

Slator

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

What you would want to

What you would want to configure is a static NAT rule. 

It looks like you can configure one-to-one NAT on the RV220W. My guess is you can just add multiple one-to-one NATs and set the range to 1.  See the following link:

http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=8aebd4f4806e47c1bb32b833cdbf6b86_Configure_One_to_One_Network_Address_Translation__NAT__Rules.xml&pid=2&converted=0

5 REPLIES
New Member

What you would want to

What you would want to configure is a static NAT rule. 

It looks like you can configure one-to-one NAT on the RV220W. My guess is you can just add multiple one-to-one NATs and set the range to 1.  See the following link:

http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=8aebd4f4806e47c1bb32b833cdbf6b86_Configure_One_to_One_Network_Address_Translation__NAT__Rules.xml&pid=2&converted=0

New Member

Thanks Jordan - I will give

Thanks Jordan - I will give it a try tomorrow/Saturday.

New Member

in IOS Routers the command is

in IOS Routers the command is (not sure about RV220W):

ip nat inside source static <Global IP> <Local IP>

Example

ip nat inside source static 70.xx.xxx.101 192.168.2.xxx

don't forget to apply nat to the interfaces

 

New Member

 Thanks for the response but,

 

Thanks for the response but, I am working via the GUI and, given my RV220W experience, I think it best if I continue with the GUI.

New Member

That's the easiest way. I had

That's the easiest way. I had it working with the range, but can't seem to get that working for some reason..

 

100
Views
0
Helpful
5
Replies
CreatePlease login to create content