How to set up Cisco 877w VPN set up for remote office?
i am looking for a basic configuration for a teleworker set up, with the remote office using a 877w and a UC520 at the main office. First is there a simple config to get the 877w functional should i use CCA? If i use CCA can i set it up to use a vpn server that the company currently has running or do i have to make the vpn connection straight into the uc520? Currently i am unable to configure theUC520 with CCA becuase i have fax applications working on it and it seems like CCA doesnt like that. So i am doing all through command line. If i need to set up vpn on UC50 some configs would be gratly appreciated.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...