Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

ICMPv6 RA: ndisc_router_discovery() failed to add default route

I have the rv215w and have it setup on our network. I have downloaded and installed the latest firmware prior to putting the router in place. The issue I have though ius I keep getting "ICMPv6 RA: ndisc_router_discovery() failed to add default route" repeatedly in the logs. I have it set to dhcp and not sure what I need to do to resolve this issue.

2 REPLIES
New Member

ICMPv6 RA: ndisc_router_discovery() failed to add default route

I have the same issue.  In my case, as I posted here, IPv6 only seems to work on the main VLAN, but not on the other(s).  I wonder if this "ICMPv6 RA" error is referring to the default route that fails to install on the extra VLAN(s), but of course I am not exactly sure.

New Member

Had the same issue and

Had the same issue and resolved it by making sure the default gateway was set correctly. My gateway was set to a link-local address.

 

#route -A inet6

::/0                           2001:470:xxxx:xxxx::1       UG   1024 0     0 eth0

1256
Views
0
Helpful
2
Replies
CreatePlease to create content