Hi, I have a RV042 with latest firmware (4.0.4.02) and I´m trying to conect to Internet in port WAN1 with the optino "Obtain an IP automatically". I have noticed that the router receives an IP from the modem, I´m able to connect to the from a PC in the same WAN subnet to the WEB Management page, but in the system summary the Wan Status is IP address 0.0.0.0 default gateway 0.0.0.0 DNS 0.0.0.0 and the pc in the internal LAN couldn't surf Internet.
The only way is assigning an static IP an DNS servers, and then all works fine.
On the system log shows the message "infinite IP address lease time. Exiting" when activate the IP automatically for the WAN1 connection type.
There is no option to change the leased time.
I need to send a router to a remote office where the connection to INternet is with a dynamic IP. Help please
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...