Hi, I had used cisco's router with VPN tunnel for connection network of different locations. While before I used PPTP access to one static ip router and could reach NAS on different locations before, the new iPhone iOS does not support PPTP anymore. As I setup IPSec access to the router, I found that the IPSec access does not allow me to access other groups. Can anyone let me know whether I make a wrong setting or Cisco's router does not allow that?
Just noticed another issue that PPTP will use the ip address in the group while IPSec will have other vitrual ip address outside the group. I could not set this virtual ip address pass through the VPN tunnel.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...