Thank you for reaching the Small Business Support Community.
Even though the firmware version 18.104.22.168 addresses some IPv6 issues, I think this is something new. I see on the ICMPb and c gif files that both access rules actions are "always allow" but you also say to try both actions, allow and deny, with no difference. In my opinion it is a bug and I suggest you, in order to confirm and provide a solution, to contact the Small Business Support Center directly to have one of our TAC engineers figure this out;
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...