Thank you for posting. To get the security certificate, browse to VPN-> VPN Client Accounts. Look for Certificate Management and press Export for Client. Save the file in C:\Program Files\Cisco Small Business\QuickVPN Client (or equivalent) on the client PC.
Note that the certificate is not required to connect. It is simply a warning to the end user that they may not be connecting to the correct router. If the certificate is installed the warning popup will be disabled.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...