Load Balanced on Cisco RV042 - Unable to use Nortel VPN
So I just received by Cisco RV042 and I'm LOVING it so far. Only one minor problem, sometimes I'm not able to use some services (maybe b/c it bounces connections between the 2 public WAN (DSL + Cable), one example is SSH can drop after being connected for 5 hours).
But anyways, the big problem I'm having is I can't connect to my company's network using Nortel VPN, it operates fine being plugged directly into the internet, but not through the router. Is there anything in particular I have to configure for this to work? It nearly connects, sometimes saying it's about to show the banner, but then it fails and asks me to retry.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...