Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Need to create contiguous subnet using 2 rv120w gateways

Hi,

I have been tasked to create a Voip system using Cisco UC320 to serve one main and one auxiliary office. I think there is no way to use the UC320 as a VOIP gateway on multiple subnets so  I need to create contiguous IP space between the two branches. I was able to create site-to -site VPN using the RV120W firewalls but I have two subnets 192.168.1.1 and 192.168.2.1  and the IP phones in the auxiliary office do not register. Any ideas how this can be achieved?

Thanks!!

1 REPLY
Bronze

Need to create contiguous subnet using 2 rv120w gateways

Dear Svetoslav,

Thank you for reaching the Small Business Support Community.

It's been several days since you posted your inquiry with no answer from the community members yet, I therefore suggest you to inquire about this in the Small Business Voice and Conferencing support group;

https://supportforums.cisco.com/community/netpro/small-business/voiceandconferencing

Just in case notice you may request from others support channel available;

https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport

Please do not hesitate to reach me back if there is any further assistance I may help you with.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.
254
Views
0
Helpful
1
Replies
CreatePlease to create content