Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PBX Hardware assistance - SPA3120

Hi All,

I'm looking at the SPA3120 voip router as a possible device to connect a single analog phone line to a linux based PBX- perhaps asterisk or freeswitch.

Any voice mail and call routing (inter office or office to/from pstn)  should be handled via the pbx.

VOIP is another matter,  office phones (4) are planned to be ip based and will connect via common ethernet line.

While the pbx applications support voip would the spa provide a better solution?

Right now just need a low cost analog to pbx device.  is the spa3120 the device to use or should I look at different linksys/cicso products or perhaps a x100p pci card installed in the server?   

I suspect with the spa series device I don't have as much to worry about regarding pbx & linux hardware issues, but don't want to buy features I don't need

Don't need a lot of bandwidth how much can 4 phones need?

New to all this so feeling a bit lost...

Everyone's tags (3)
410
Views
0
Helpful
0
Replies
CreatePlease to create content