Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PEAP authentication failure with RV120W

Hi all,

I have a Cisco Small bussiness RV120w and I setup the radius server , WPA2 Enterprise with a windows 2008 NPS radius server . The big problem is that the authentication fails .

This is the error that I see in event viewer / server roles / Network policy and access services :

reason-code 49 "The connection attempt did not match any connection request policy".

The radius key is matching between the server and the client .

The radius server is reachable and I don't find any routing issues .

Does anybody tested this router with this type of wireless security ? What do you suggest to do ?

Everyone's tags (4)
3 REPLIES

PEAP authentication failure with RV120W

RV220W release note mentioned a known issue with a workaround. RV120W likely has this known issue.

WLAN clients fail to connect to the router using WPA Enterprise or

WPA2 Enterprise. (CSCtj76452)

Work Around: To work around this issue, disable the Block Fragmentation

option in the Firewall page.

New Member

PEAP authentication failure with RV120W

I see this is disbaled by default. The setting is the one from Firewall-> Attack Prevention - > ICSA Settings  ?

PEAP authentication failure with RV120W

Yes, that's the option I referred to. If the issue persists, please consider contacting the Support Center to open a ticket so the issue can be further analyzed.

734
Views
0
Helpful
3
Replies
CreatePlease to create content