I just bought an RV320 and it is working great, except some specific forwarding rules I need ...
Here is what I'd like to do :
How to accept connections on Port1 only from WAN1 (and not from WAN2) ?
Same question for connections on Port2 arriving on WAN2 (and not from WAN1) ?
I hope that you see what I want to do, and that you can help me ... I tried to add some Firewall Access Rules for WAN1 and some others for WAN2 but the RV320 only open the ports on WAN2, even if WAN1 is specified in the rule ...
Waiting for news from you ...
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...