Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Provisioning SRP 500

Hi,

we have a router SRP 527. Some of our cutomers are thinking about buying this and the SRP 547. The idea being that it is a router with QoS together with a ATA of 2 or 4 lines. The question is: Can we provision the SRP using the SPC tool for the SPA 112?. If not does it has its own spc?, any pointer to specific documentation would be really apprecited.

Thank you, Diego Betancor

  • Small Business Routers
1 ACCEPTED SOLUTION

Accepted Solutions

Provisioning SRP 500

I used the profile compiler (SPC) tool of WRP400 to build an XML provisioning file for SP520 and SRP520-U. Probably is not the best way but it works.

I don't found a specific SPC for SRP.

Regards.

2 REPLIES

Provisioning SRP 500

I used the profile compiler (SPC) tool of WRP400 to build an XML provisioning file for SP520 and SRP520-U. Probably is not the best way but it works.

I don't found a specific SPC for SRP.

Regards.

New Member

Provisioning SRP 500

Thank you Daniele, it works.

Probably it would work as well for a spa122 or 2102 if you take away the IP and DNS stuff as the commands are more or less the same. I think the different versions of spc, what they do is just to check the comands.

637
Views
0
Helpful
2
Replies
This widget could not be displayed.