There are a number of threads in regard to QuickVPN and issues with Windows 7 64-bit. However, most of them appear to be older (more than a month or two old), or have become inactive with no solution found. I know the latest version of QuickVPN is supposed to solve the issue, but that doesn't appear to be the case in my situation. Example threads:
I have a couple of clients on WinXP Pro successfully using QuickVPN to connect to our WRVS4400N. However, one client has Windows 7 64-bit. I've installed the latest version of QuickVPN (QVPN_UTL_188.8.131.52), and uninstalled Norton Internet Security (resetting the Windows Firewall to defaults). However, it still fails to connect, giving me a "Remote gateway is not responding." dialog.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...