Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Remote Desktop and Cisco RV042 Small Business

With our old Linksys wireless router on Applications issue we can redirect port, for example: 

Remote Desktop access from external pc: 201.85.X.X:1234    (appoint to our public IP and port 1234 )

Whit this we access in the Lan the private 10.1.X.X  WinVista Pro machine terminal services.

I want to forward port  1234  external >>>  3389 Lan . Is possible with RV042 ??

Note: Firmware Version :     v4.1.1.01 (the most recent)

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Remote Desktop and Cisco RV042 Small Business

To change ports source/destination you need to use the UPnP feature 

that's what i use on the RV0XX

best luck

Remote Desktop and Cisco RV042 Small Business

The asymmetric port forwarding config table is available at the Setup>UPnP page. Note that UPnP needs not be enabled (i.e. the UPnP checkbox can remain unchecked) to use the asymmetric port forwarding.

3 REPLIES
New Member

Remote Desktop and Cisco RV042 Small Business

To change ports source/destination you need to use the UPnP feature 

that's what i use on the RV0XX

best luck

Remote Desktop and Cisco RV042 Small Business

The asymmetric port forwarding config table is available at the Setup>UPnP page. Note that UPnP needs not be enabled (i.e. the UPnP checkbox can remain unchecked) to use the asymmetric port forwarding.

New Member

Re: Remote Desktop and Cisco RV042 Small Business

Nice, I'll try UPnp later. Thanks.

------------------

Done, works great. Thanks a lot.

1999
Views
5
Helpful
3
Replies
CreatePlease to create content