Our environment is connected with 2 MPLS and been communicated with one remote locations . The issue whenever one of our MPLS is down , another link in our location also not able to reach from our local site vis core switch . But some how the remote site is able to ping our first Router and not second Router . As per Vendor report, BGP is showing up for past 5 week in our first Router, so there isn't any issue.
Kindly clarifiy me why iam not able to reach both the router . once any one of the link was down.
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...