I have a RV-120W and need the ability to configure it to reboot itself after a certain time period due to cable modem being reset and the RV-120W not detecting the loss of interent connectivity and requesting a DHCP address. Alternatively, an internet watchdog service would solve the problem as it would recognize loss of internet connectivity and reboot itself to restore the connection. Any way to achieve this? Software version is 188.8.131.52.
Our apologies for not responding in a timely fashion.
I am going to reach out to our Product Development team and find out if they know of any trigger in the system to perform what your asking. To the best of my knowledge there currently is not something to force this reboot as you have described but I want to reach out to them first and confirm.
I have spoken to our Development team and they have advised that this functionality is not supported. Currently, the router is only going to request a new DHCP lease when the current one has expired. On this router, that time is 1 day.
The only way to resolve the issue you are experiencing is manual intervention by power cycling the router, or rebooting via the management console.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...