I am trying to disable all the LAN ports on my RV 120W router to prevent someone from plugging in a rogue device and accessing our network. I want to only enable secure wireless on the router. I can disable all of the LAN ports through port management except port 1 which is grayed out. Is it possible to disable port 1? If so how? I really don't want to resort to MAC address filtering, etc. as that is too labor intensive. I don't understand why Port 1 is grayed out in port management and will not allow being disabled.
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...