Hi, sorry form my english but im not native.
I created VPN site to site tunel on RV 180 and it works fine. I see both networks. But when i turn VPN on i do not have access to internet.
When VPN is off Internet is working...
This is my route table:
Pv4 Routing Table
| Destination | Gateway | Genmask | Metric | Ref | Use | Interface | Type | Flags | |
| 127.0.0.1 | 127.0.0.1 | 255.255.255.255 | 1 | 0 | 0 | lo | Static | UP,Gateway,Host | |
| 97.111.29.0 | 0.0.0.0 | 255.255.255.240 | 0 | 0 | 0 | eth1 | Dynamic | UP | |
| 192.168.11.0 | 0.0.0.0 | 255.255.255.0 | 0 | 0 | 0 | bdg1 | Static | UP | |
| 192.168.11.0 | 192.168.11.1 | 255.255.255.0 | 1 | 0 | 0 | bdg1 | Static | UP,Gateway | |
| 127.0.0.0 | 0.0.0.0 | 255.0.0.0 | 0 | 0 | 0 | lo | Dynamic | UP | |
| 0.0.0.0 | 97.111.29.1 | 0.0.0.0 | 0 | 0 | 0 | eth1 | Dynamic | UP,Gateway |
I didnt do any changes on it.
I also added Access Rule for outgoing HTTP and HTTPS:
| Default Outbound Policy |
| Policy | Allow X Block | |
Access Rule Table
And of coures i checked all firmawes. Now i have latest one 1.0.4.14.
When i use Diagnostics->Network Tools i can ping both internet and trougth VPN so this is not ISP problem.
I to do? Any help?
