I'm trying to set up a VPN with a Cisco RV180W and remote client.
The goal is to access data on the hard drive of a workstation on the LAN side of the router. Both client and "sever" machines are running Win 10 Pro - latest version. QuickVPN does not seem to work with Windows 10 and Cisco says it is not supported on 10. I set up a PPTP Server and can get the client to connect to the RV180W but they can not see anything on the network. Any ideas?
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...