12-04-2013 06:40 PM
I have two Cisco WAP321 AP's and a Cisco RV016 Router.
I use the RV016 as the DHCP server for the network.
I would like to use the guest SSID mapped to a VLAN to issolate it from the rest of the network.
How do I setup the RV016 to route traffic from both the guest VLAN and the internal VLAN to the internet while still using it as a DHCP server.
Thanks for any assistance.
John McArthur
Solved! Go to Solution.
03-16-2014 01:49 PM
Hi, this is basically an unsupported configuration. The RV016 supports only port based VLAN and only 1 DHCP scope. If you want a guest VLAN inconjunction with the router something like a layer 3 switch would need to be implemented between the router and AP to accomadate this configuration.
03-12-2014 03:12 PM
03-16-2014 01:49 PM
Hi, this is basically an unsupported configuration. The RV016 supports only port based VLAN and only 1 DHCP scope. If you want a guest VLAN inconjunction with the router something like a layer 3 switch would need to be implemented between the router and AP to accomadate this configuration.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: