Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV016 and WAP321 with a guest network

I have two Cisco WAP321 AP's and a Cisco RV016 Router. 

I use the RV016 as the DHCP server for the network. 

I  would like to use the guest SSID mapped to a VLAN to issolate it from the rest of the network. 

How do I setup the  RV016 to route traffic from both the guest VLAN and the internal VLAN to  the internet while still using it as a DHCP server.

Thanks for any assistance.

John McArthur

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Green

Hi, this is basically an

Hi, this is basically an unsupported configuration. The RV016 supports only port based VLAN and only 1 DHCP scope. If you want a guest VLAN inconjunction with the router something like a layer 3 switch would need to be implemented between the router and AP to accomadate this configuration.

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
2 REPLIES
New Member

I also would like to hear the

I also would like to hear the answer :) (bump!)
Green

Hi, this is basically an

Hi, this is basically an unsupported configuration. The RV016 supports only port based VLAN and only 1 DHCP scope. If you want a guest VLAN inconjunction with the router something like a layer 3 switch would need to be implemented between the router and AP to accomadate this configuration.

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
442
Views
5
Helpful
2
Replies