I need help to get this functional. We are trying to use the Rv016 to run our LANcenter. But when we try and connect to xbox live we keep getting a strict or moderate NAT type error message. This is preventing xboxes that sit right next to each other from playing together online. I have tried to open ports, but that only seems to help for 1 xbox. I tried port triggering with no success, and the one to one Nat may work but if it does I'm setting it up wrong. All IPs are static on the network so that wasn't the problem either. I have also tried Access rules and even turning off the firewall with no change. Help please.....
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...