RV016 Router with Microsoft Exchange 2010 Server with an Edge Transport Server.
With my Cisco Model RV016 16 port wired router, I am forwarding ports from the Edge Transport Servers IP Address instead of from the Exchange 2010 Servers IP Address and with their Subscription enabled and I'm not getting any e-mail in the users mailbox. Anyone have an idea why this is happening when I know that I should be receiving e-mail?
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...