The DDNS tab only permits 15 characters for the URL used for Dynamic DNS, however, I use DDNS and my URL is jrhelgeson.boldlygoingnowhere.org, and boldlygoingnowhere is 18 characters.
The first field accepts 20 characters, second accepts 15, third accepts 4.
My workaround/hack I used to get this to work is in the first field, where you currently see Host Name: "jrhelgeson", I entered j.boldlygoingnowhere
and in the second field, i put in .org. After submitting this information, it parsed the data and populated "boldlygoingnowhere" into the second field, which only permits the 15 characters, and it put ".org" into the third field, so I deleted the period in the third field leaving it just "org". Then I could delete the data in the first field, and type in JRHelgeson, then submit it, and as you can see, it submitted just fine.
And now that you know what my DynDNS is, you can all come check out pictures of my family and kids, as soon as I get everything configure... whenever that is.
Yeah, I looked at your post and I was trying to figure out the model of router you have. It looks like one of our rv series routers. As of yet, I don't know of any workaround the characters in the dnydns tab for your domain name. I would maybe select a shorter domain name to connect up to the router. Plus I would make sure you have the latest version of firmware on the router as that may fix it. Without knowing what router model that is all i have to go on.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...