i have an RV042 dual wan that is connected to a dsl line and a cable modem line. i run several apps that stream data and use several web pages at a time. i am having an intermittent problem where my programs and webpages will not be able to connect to what they were connected to. for example AIM gets disconnected and will not reconnect or i won't be able to access a web page. I have two desktops connected and can be running a continuous ping to say "google.com" successfully yet lose connections in individual webpages and programs. (Another ex: i cannot access google.com in web browser on one machine, but can on the other machine - while ping google.com is working on both). i'm wondering if it is because the a program establishes a connection through one provider and cannot switch easily to the other... say if my dsl went down and existing connections through the phone company cannot reset through the cable company. An example - i unplugged my cable modem and all of programs and web pages lose connection and cannot reconnect, even though the dsl line is still up. For some reason, I thought the load balancing feature in this router could handle all of this. Can anyone tell me if I am wrong in thinking this?
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...