Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RV042 multiple private networks, one internet connection

I'm trying to configure an RV042 to route between two private networks. 

I'm getting internet access from an ISP via WAN1. (WAN1 IP 192.168.0.2/24 192.168.0.1GW)

Private network A is 192.168.200.0/24 is completely local and I have it configured on the LAN.

Private network B is 10.50.3.96/27  (WAN2 10.50.3.126 10.50.3.97GW) is currently a single network but will eventually be connected to a larger routed network through the 10.50.3.97GW .

I only want internet for network A. 

I don't need network A to see more than the B network.

I need network A to get to B and B to get to A.

Is this possible with an RV042?

Is it possible using multiple subnets and having Network A & B on the LAN ports?

THANKS in advance from the top of a very cold mountain in Whitefish Montana!

BTW  - It's currentyl in GATEWAY mode but I've tried router mode and have tried adding a static route to B) on WAN2.  I've also added an ALLOW ALL to WAN2. 

604
Views
0
Helpful
0
Replies
CreatePlease to create content