1) Do I understand correctly that PAT rules (created under uPnP) bypass the firewall rules? I need to filter some PAT connections on originating IP and that does not seem to be an option. I tried creating a firewall rule for WAN->LAN to the internal IP configured in the PAT entry but that does not seem to matter, I can connect anyway. Is their a way to accomplish this?
2) QuickVPN does not seem to work for me I get an error and no connection, yet the management webpage of the RV042 shows this user as connected?
2012/06/27 16:20:26 [STATUS]OS Version: Windows XP
2012/06/27 16:20:26 [STATUS]Windows Firewall is OFF
2012/06/27 16:20:26 [STATUS]One network interface detected with IP address 192.168.2.8
2012/06/27 16:20:26 [STATUS]Connecting...
2012/06/27 16:20:26 [DEBUG]Input VPN Server Address = x.x.x.x.
2012/06/27 16:20:26 [STATUS]Connecting to remote gateway with IP address: x.x.x.x
2012/06/27 16:20:26 [WARNING]Server's certificate doesn't exist on your local computer.
2012/06/27 16:20:29 [STATUS]Remote gateway was reached by https ...
=> `C://Program Files//Cisco Small Business//QuickVPN Client//vpnserver.conf'
Connecting to x.x.x.x:60443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
0K 164.06 KB/s
If I understand correctly the missing server certificate should not keep you from connecting, you just can't validate the connection is to the correct VPN server. The subnet I'm connecting to is different from the subnet I start the VPN connection from.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...