RV042 - Port forward/translation from ext to int

[catalin.patrascu]

Hy,

I recently buy a CSRV042-EU. I need to make a translation port to acces remote some of my server on lan.

I use a primary WAN with static IP 83.166.XXX.XXX .The LAN has aprox. 30 clients.

I want to acces remote one of the computer from LAN, as example:

83.166.xxx.xxx:10101 -> 192.168.10.10, using 10101 as external port and 3389 as internal port for remote on 192.168.10.10 machine

83.166.xxx.xxx:10102 -> 192.168.10.11, using 10102 as external port and 3389 as internal port for remote on 192.168.10.11 machine

......

I don't konw how to do this forward because in Port Forward i cannot find the option to enter teh ext port and the int port.

Could you please help me with an example, how ca i make this forward?

Thank you !

[Te-Kai Liu]

This can be done with asymmetric forwarding rules, which can be defined in the UPnP Forwarding page under Setup. Note that the UPnP does not have to be enabled/checked to activate the static asymmetric forwarding rules.

[catalin.patrascu]

Thank you for your answers.

In UPnP i set the external port for each internal LAN IP  i want to acces from outside ?

ex: Declare a service - "Server 1" with IP range 10101-10101 for IP 192.168.10.10 ?

Is this setting correct ?

[Te-Kai Liu]

Yes, it sounds correct.

[ti00000035]

I know it's been this long post, but I have the following question ...

I have several external IPs and would like to designate for each type of service.

eg:
200.0.0.1 => http => 10.0.0.2
200.0.0.2 => https => 10.0.0.1

How could this setting in RV?

Today I have two models in the network-to-VPN Gw Gw the RV016 and 042.

Regards,