I have an RV042 that has recently started causing problems with ActiveSync and my Droid with Touchdown. ActiveSync is throwing the following event:
Event Type: Warning Event Source: Server ActiveSync Event Category: None Event ID: 3033 Date: 11/23/2010 Time: 2:01:21 AM User: DOMAINNAME\User
Computer: MONSTER Description: The average of the most recent  heartbeat intervals used by clients is less than or equal to . Make sure that your firewall configuration is set to work correctly with Exchange ActiveSync and direct push technology. Specifically, make sure that your firewall is configured so that requests to Exchange ActiveSync do not expire before they have the opportunity to be processed. For more information about how to configure firewall settings when using Exchange ActiveSync, see Microsoft Knowledge Base article 905013, "Enterprise Firewall Configuration for Exchange ActiveSync Direct Push Technology" (http://go.microsoft.com/fwlink/?linkid=3052&kbid=905013). more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
The Microsoft link says to change the HTTPS timeout says to lengthen the HTTPS timeout on the router. From what I've found so far there is no way to do that on the RV042. Some suggestions say to try changing the MTU which I have experimented with with no luck. Does anyone have any experience with this or am I stuck upgrading to a better router?
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...