I was never able to get QuickVPN to work with my RV042 on our new computers, which use Windows 7 (64-bit). I found some positive comments about Shrew Soft VPN Client, but I can't get it to work either. All computers are using Windows 7 Professional. Here's the rest:
Multicast Pass Through enabled
IKE with preshared key
VPN Pass Through enabled
Shrew Version 2.1.5
Shrew hangs on "bringing up tunnel," right after preshared key configured.
The debug log states that IKE packet gets sent with no response, and negotiation times out.
I'm out of ideas. Please help.
Configure your RV042 like this screen : http://omploader.org/vMzFhMA
Import on Shrew Soft this file : http://omploader.org/vMzFhMQ/Cisco%20Small%20Business%20RV042 and change configuration for your network (Subnet, Server adress and preshared key)
Check out this posting as well. Well worth a look at using the native IPSec client in windows 7. Just wish I had a powerful enough PC that would accept windows 7 so i could validate the procedure in the posting below;
Message was edited by: Cindy Toy
Hi aaa bbb,
The link has been updated.
Cisco Small Business Community Manager
for Cisco Small Business Products