Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV042G log issues

Hi,

 

I think that there is some problem with the logging service. I am using the latest 4.2.3.03 firmware.

 

I set up Client N to use S/SMTP and S/IMAP on ports 465 and 993 respectively. These ports are forwarded to 192.168.0.211.

I set up Server R to use HTTPS on port 443. This port is forwarded to 192.168.0.200.

However, for some reason, in the logs, Client N is shown to be connecting to port 25 on 192.168.0.211, when it should be 465 or 993.

Similarly, Server R is shown to be connecting to port 25 on 192.618.0.200, when it should be 443.

 

However, when I connected Client T to access 192.168.0.211 through port 500 (VPN), the port was recorded in the log correctly.

This appeared to have led the subsequent access by Client N to be recorded as 500, instead of 465 or 993.

 

Is anyone else facing this issue?

 

Nov 6 00:26:45 2014ACCESS_RULETCP [Server Z]:41653->192.168.0.211:25 on eth1
Nov 6 02:34:14 2014ACCESS_RULETCP [Server Y]:41653->192.168.0.211:25 on eth1
Nov 6 06:08:17 2014ACCESS_RULETCP [Server X]:48718->192.168.0.211:25 on eth1
Nov 6 08:21:02 2014ACCESS_RULETCP [Client N]:48718->192.168.0.211:25 on eth1
Nov 6 09:22:37 2014ACCESS_RULETCP [Server R]:48718->192.168.0.200:25 on eth1
Nov 6 09:36:32 2014ACCESS_RULETCP [Client N]:48718->192.168.0.211:25 on eth1
Nov 6 10:37:20 2014ACCESS_RULETCP [Server R]:48718->192.168.0.200:25 on eth1
Nov 6 10:38:55 2014ACCESS_RULETCP [Client N]:48718->192.168.0.211:25 on eth1
Nov 6 10:58:49 2014ACCESS_RULETCP [Server R]:48718->192.168.0.200:25 on eth1
Nov 6 11:06:34 2014ACCESS_RULETCP [Client N]:48718->192.168.0.211:25 on eth1
Nov 6 11:51:34 2014ACCESS_RULETCP [Server R]:48718->192.168.0.200:25 on eth1
Nov 6 12:04:20 2014ACCESS_RULETCP [Client N]:48718->192.168.0.211:25 on eth1
Nov 6 14:49:16 2014ACCESS_RULEUDP [Client T]:19947->192.168.0.211:500 on eth1
Nov 6 14:51:20 2014ACCESS_RULEUDP [Client N:19947->192.168.0.211:500 on eth1
  • Small Business Routers
30
Views
0
Helpful
0
Replies