02-08-2012 02:13 AM
Hey all,
We have recently purchased an RV082 router for our company.
I have successfully managed to establish a VPN connection through PPTP and through QuickVPN (IPSEC?)
When i am connected through PPTP my software SIP client has 0.5% packet loss which is totally acceptable.
When i am connected through QuickVPN my software SIP client has a 50-70% packet loss.
i have done the following settings on the router:
Bandwidth Management:
High Priority for upstream and downstream UDP 10001-20000 and UDP 5060-5080
Wan Connection settings:
MTU: 1492 bytes
I would like to know if there are any other settings that will improve VOIP over QuickVPN since RV082 supports 100 connections compared to 5 for PPTP.
03-05-2012 03:16 PM
Michael,
IPsec have more over head per packet - Im guessing this is where the packet loss is coming from. How many clients are connected at the same time when this is occurring? We would need about min of 512K per IPsec tunnel to suppprt VoIP.What is your upload and downlaod ISP connection speeds?
Jasbryan
03-23-2012 12:10 AM
I have solved the issue using ShrewSoft VPN client and the following tutorial
http://www.shrew.net/support/wiki/HowtoLinksys
Works like a charm!!!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide