HELP! I have a RV082 with firmware 2.0.2.01-tm that keeps showing a "There is a problem with this website's security certificate" error message on every computer in the office after I updated to firmware 2.0.2.01-tm (previous version was 18.104.22.168-tm). I'd click on "Continue to this website" and be able to access the router on a few computers, but for our file server. I've tested on computers running XP, 7 & 8 using IE 8, 9, & 10 and there seems to be no pattern as to which ones will allow me to gain access and which ones won't. The file server is running Server 2003.
My questions are:
1. How do I get rid of the "security certificate" error message?
2. How do I get all computers to be able to gain access to the router on the ones that need access, but can't?
3. Why did this message show up after I updated the firmware?
Thanks in advance for any help/information on resolving this problem!
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...
Article ID:541 Firmware Upgrade on RV016, RV042, RV042G, and RV082 VPN
Routers Objective To upgrade the firmware, a specific file must be
downloaded from the Internet and uploaded to the device. Firmware
upgrades can fix software bugs, improve features, a...