I tryed all the solution found in this discussion group but nothing working, included activate firewall of Windows 7 and add a ICMP inbound rule.
In the firm I have my RV082 under a modem router Zyxel, I nat 1-1 one of my IP to RV082. If I ping this IP from home all working.
At home I have a computer with Windows 7 under a firewall Zyxel, here I have only 1 IP. I connect with RDP to my firm and I ping my home IP, all is working.
I can connect with https to RV082.
I opened all the port in both firewall (home ad firm) but nothing happened.
This is the log of RV082.
Now I tryed
with nat in zyxel port 60443 to RV082 and remove nat 1-1.
And at home I tryed with Windows XP.
P.S. There is someone in this forum?
In any cases we recommend the router which is making the VPN connection to be with the public IP and not behind NAT, especially when Quick VPN is used.
If, for some reason you cannot use such configuration, than the router, which is in front of RV082, should be configured with the IP address of RV082 in DMZ, or like you do One to One NAT - this should allow all ports. But apart from that configuration, the Zyxell should support IPSec Passthrough option. If this is not supported, the Zyxell will not allow ESP packets to enter from WAN to LAN.
I think it would be better to call the Small Business support line. An engineer can help you find out where the conversation is stopping. Hereby the contact details: http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Do you have IPSec passthrough activated on the Zyxell in front of RV082.
It looks like the negotiation process completes successfully - meaning the conversation on ports UDP 500 and/or 4500, but after that when qcuick VPN sends ping to the RV082 local IP, encapsulated in ESP packets they do not receive reply. So the question is, do they reach RV082.
now I have tried with a simple Netgear modem/router/firewall.
I make a nat of all ports and protocols tcp udp (excluded https 443; rdp 3389) to RV082, but I have the same problem (like zyxel). This modem not allow me to set ICMP.
Let me to explain what I'm going to do.
I'm a manufacturer of automatic machines with plc, panel-pc etc., I need to have tele assistance.
I don't know what is the modem of customer and his LAN, I want tell him make this nat so I can open a VPN with the machines. I bought a RV082 and a RV042 in order to have a standard solution for tele assistance.
I don't know what else to do.
Any help would be appreciated.