I have a small problem: I succeeded in etablishing a VPN connection to my RV110W from Internet. When I'm connected with my VPN connection and surf on the web, my public IP address is my home router's one. However, I can't join my home computers.
My VPN adress is 10.0.0.10.
Ping to 10.0.0.1 and 10.10.10.1 (RV110W adresses both) works, but I can't ping to 10.10.10.101 (home computer). I tried with all my firewalls inactive.
Are you connecting to the router using the Quick VPN software. This is an IPSec Tunnel. The feature I beleive you are looking for is Netbios broadcast, but this feature is not supported while using Quick VPN. It is normal to see the public IP of your router at home, if you are connecting from home, because with Quick VPN, and most other remote VPN software, you still have the capability of using your local internet. If you are trying to contact the 10.10.10.101 on the LAN side of the RV110W, then make sure that workstation is not blocking any services. You may want to disable to the firewall and anitivirus on it temporarily, then try to ping. Also try another protocol like Remote Desktop. While connected using Quick VPN, you will not be able to see the computer he computers on your network, but if the network allows, then you should be able to contact them using the IP address.
If you have any further questions, just let us know and we'll be more than happy to assist.
Check if you have any antivirus/firewall software on the PC you are trying to reach. That software will usually block access to the PC from any subnet that it does not belong to. Disable that software and test. If you can reach the PC, then create a rule in that security software to allow access to the PC from the IP Address range that you created on the RV110W for PPTP clients.
If you have a network printer, print server, NAS, IP camera, etc; try pinging that device. They will usually respond through a VPN tunnel because they do not have firewall or antivirus software on them. This is a good way to test if the tunnel is working properly.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...