I have new RV110W with firmware 126.96.36.199, which is set to gateway operating mode and I have problem with port forwarding on LAN. I have web server in LAN with services on different ports and static public IP on WAN port and set port forwarding on RV110W firewall in port range forwarding. From Internet everything works fine, but when I try connect to server with public IP,that I have set on WAN port, from LAN, it´s not work. Please can you tell me whether it is a standard feature or I have some errors in configuration or it´s firmware bug? Thanks for your answers.
this feature is called NAT Redirection (possibility to access local resource from local (same) network by external IP address) and is usually disabled by default for security reasons. You can find pretty good explanation here:
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...