Has anyone ever been able to use an ASA5505 (main office) and RV120W (remote office/ teleworkers), with an IP phone to work?
The main office has the servers including an Astrisk phone server, The main office's ASA5505 is running 8.2(1).
We are testing out 2 sites with RV120W devices and getting the same results. All the other tunnel routing behaves as expected. The phones will ring and the remote can hear. The other side of the call can not hear the remote site. We've turned off SIP ALG just to get to phones to register. We set the ASA5505 to no filter for everything and no inspect for most.
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...