Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV120W VPN and DHCP Relay wint windows 2008 R2

Hello,

Here's a quick diagram of what I realized:

Windows 2008 --- LAN1 (Ipcop) --- --- LAN2 web over VPN (cisco RV120W) --- PC

My ping RV120W well my windows 2008 and vice versa, although my client PC ping cisco 2008 and the windows.

On the Cisco DHCP relay I add the ip of my 2008 and I declare it an area plan with the active DHCP IP LAN2.

My client are unable to retrieve IP address with a Cisco 800 Series it worked well :-(

Would you have any idea

thank you

Everyone's tags (4)
3 REPLIES
New Member

RV120W VPN and DHCP Relay wint windows 2008 R2

I asked a question because I managed this operation with a cisco 857, but the RV120 or RV220 cisco can they do the dhcp relay through a VPN tunnel ?

New Member

Re: RV120W VPN and DHCP Relay wint windows 2008 R2

II found an old post that says this is impossible, is there a manipulation to correct this problem? this is very improtant because we had to use a dozen copies of this model.

I try to change backup.cfg

DhcpRelay = {}

DhcpRelay[1] = {}

DhcpRelay[1]["DhcpRelayStatus"] = "1"

DhcpRelay[1]["LogicalIfName"] = "LAN"

DhcpRelay[1]["virtualIfName"] = "bdg1"

DhcpRelay[1]["_ROWID_"] = "1"

DhcpRelay[1]["RelayGateway"] = "IP DHCP SERVEUR"

to

DhcpRelay = {}

DhcpRelay[1] = {}

DhcpRelay[1]["DhcpRelayStatus"] = "1"

DhcpRelay[1]["LogicalIfName"] = "sit0-WAN1"

DhcpRelay[1]["virtualIfName"] = "sit0"

DhcpRelay[1]["_ROWID_"] = "1"

DhcpRelay[1]["RelayGateway"] = "IP DHCP SERVEUR"

And restore the file but i've this error "Failed to update configuration as the file may have been invalid/corrupted"

Grrrr

New Member

Re: RV120W VPN and DHCP Relay wint windows 2008 R2

you know if a new firmware version will come out, because this problem is extremely blocking for me.

thank you

1252
Views
0
Helpful
3
Replies
CreatePlease to create content