[RV130W] Cannot set custom DNS servers in IPv6 mode
I am trying to set the custom DNS servers in IPv6 just like it is allowed in IPv4.
This is not allowed in the "IPv6 WAN Configuration" when "Automatic Configuration" is selected. However, this is allowed in IPv4, you can select your own custom DNS servers along with"Automatic Configuration" for DHCP.
Under "IPv6 LAN Configuration", when trying to change "Static DNS 1" and "Static DNS 2", the changes are not reflected in "System Summary". It is always set to my ISP's DNS IPv6 servers.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...