Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RV180 IPSEC from Android

Hi,

I am getting this problem when trying to connect to ipsec vpn

 

Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO:  Received attribute type "ISAKMP_CFG_REPLY" from 46.135.70.24[32684]
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO:  Login succeeded for user  "admin"
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO:  XAuthUser admin Logged In from IP Address 46.135.70.24 
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] INFO:  Received attribute type "ISAKMP_CFG_REQUEST" from 46.135.70.24[32684]
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] ERROR:  Local configuration for 46.135.70.24[32684] does not have mode config
Thu May 08 08:10:06 2014 (GMT +0100): [routerBB9298] [IKE] WARNING:  Ignored attribute 28678
Thu May 08 08:10:09 2014 (GMT +0100): [routerBB9298] [IKE] INFO:  Sending Informational Exchange: notify payload[10381]

 

Does anyone have idea what is wrong? What means this  Local configuration for 46.135.70.24[32684] does not have mode config?

 

View:

Selected IKE Policy View
General
Policy Namexxxxxxx 
Direction / TypeBoth 
Exchange ModeAggresive 
Enable XAUTH Client  
Local Identification
Identifier TypeFQDN 
FQDNlocal.com 
Peer IKE Identification
Identifier TypeFQDN 
FQDNremote.com 
IKE SA Parameters
Encryption Algorithm3DES 
Authentication AlgorithmSHA-1 
Authentication MethodPre-Shared Key 
Pre-Shared Keyxxxxxxxx 
Diffie-Hellman (DH) GroupGroup 2 (1024bit ) 
SA-Lifetime28800 Seconds
 

 

Thank you in advance

 

Peter

 

3 REPLIES
Bronze

I found that ipsec doesn't

I found that ipsec doesn't work because the IP of the phone is always changing. Try using the PPTP option and see if that works.
 

Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com
New Member

Hi Samir, Yes pptp is no

Hi Samir,

 

Yes pptp is no problem. But i wanted ipsec :(

Bronze

Ipsec won't work because of

Ipsec won't work because of the IP address issue.  Sorry. :(
 

Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com
84
Views
0
Helpful
3
Replies