Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

RV180 IPSEC Problem

I get the following error when I try to intiate an IPSEC connection from my Android phone. It have similar error when connecting thru Cisco VPN client on my PC. Anyone knows how to fix this problem. I have a RV180 VPN router.

Sun Jul 08 18:43:09 2012 (GMT -0700): [rv180] [IKE] ERROR:  Local configuration for xxx.xxx.225.137[49534] does not have mode config

Thanks,

Andrew

2 REPLIES

RV180 IPSEC Problem

Hi Andrew,

Please post your config and I will look into it for you.

thanks

Community Member

RV180 IPSEC Problem

Thanks for your help. Following is the VPN Configuration:

Selected IKE Policy View

General
Policy Name:49Home
Direction / TypeResponder
Exchange Mode:Aggresive
Enable XAUTH Client:
Local Identification
Identifier Type:FQDN
FQDN:local.com
Peer IKE Identification
Identifier Type:FQDN
FQDN:remote.com
IKE SA Parameters
Encryption Algorithm:AES-128
Authentication Algorithm:SHA-1
Authentication Method:Pre-Shared Key
Pre-Shared Key:26448f97d55d
Diffie-Hellman (DH) Group:Group 2 (1024bit )
SA-Lifetime:28800 Seconds

Add / Edit VPN Policy ConfigurationPolicy Name:

Policy Type:

NETBIOS:

Enable

Local Traffic SelectionLocal IP:

Start Address:

End Address:

Subnet Mask:

Remote Traffic Selection

Start Address:

End Address:

Subnet Mask:

Split DNSSplit DNS:

Enable

Domain Name Server 1:

Domain Name Server 2:

(Optional)

Domain Name 1:

Domain Name 2:

(Optional)

Manual Policy ParametersSPI-Incoming:

SPI-Outgoing:

Encryption Algorithm:

Key-In:

Key-Out:

Integrity Algorithm:

Key-In:

Key-Out:

Auto Policy ParametersSA-Lifetime:

Encryption Algorithm:

Integrity Algorithm:

Enable

Select IKE Policy:

1111
Views
0
Helpful
2
Replies
CreatePlease to create content