Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RV180 PPTP Clients - Using remote gateway

Is there a way to configure RV180 to allow PPTP clients to route Internet traffic via its own internet connection?

I.e. supporting these client options: "Send all traffic" (Mac/iOS), "Use default gateway on remote network" (Windows).

Thanks,

Everyone's tags (2)
1 REPLY
New Member

RV180 PPTP Clients - Using remote gateway

I got it working.

The PPTP server seems to assign the "Starting IP Address" as the gateway for the clients.

My original settings had the Router LAN address on 192.168.30.1, and I had "Starting IP Address" set to 192.168.30.50. The first client to connect would receive 192.168.30.51 with gw=192.168.30.50.

I changed Starting IP Address to 192.168.30.1 and all seems to be behaving well with the first client being assigned 192.168.30.2 with gw=192.168.30.1.

Perhaps it should always assign the Router LAN IP as the gateway to the clients regardless of what the pool is set to?

Otherwise a bit of documentation or a UI fix might help make this clearer.

Cheers,

1224
Views
0
Helpful
1
Replies