vlan2 - guest accesspoint for wireless 192.168.2.1/24
vlan9 - server vlan. 10.101.2.1/24
I made vlan9 specificly for a file server that I want to be accessable by clients in both vlan1 & 2. I enabled Inter VLAN Routing on 9 hoping it would be accessable to both vlans, but thats no the case and I have to have Inter VLAN Routing enabled on each vlan to allow them to talk to 9.
The issue is than vlan2 can talk to vlan1 which I dont want.
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...
Article ID:5708 Configure the LAN and DHCP Settings on the RV34x Series
Router Objective A Local Area Network (LAN) is a network limited to an
area such as a home or small business that is used to interconnect
devices. LAN settings can be configured to li...